GP Drills


Brought to you by How + Print

Bit Braces


 

Boring Tools and their Makers


 
  Swedish Braces and Bits by James E. Price 1 of 2  

Letís explore a bit
deeper into traditional woodworking tools from
a region that has been discussed in a previous post.

 

 

Todayís post focuses only on Swedish braces and bits.

Years ago I found that tools from other cultures and other times in the past felt very different in my hands and I wanted to know how well they performed at the bench.

The first thing that enters my thought process when I pick up an 18th-Century Swedish brace is how small it is compared to the braces of England and America. I have included photos of Swedish braces for your viewing and captioned each photo with relevant information about the photo subject.

All the braces in my post are typical of early Swedish types. All accepted flat-tanged bits. Four of the five braces have a typical two-part thrust-block head. All five braces have side latches that enter a hole in a bit tang to retain the bit in the chuck. All have a slanted upper arm and a lower arm approximately 90 degrees to the crank wrist.

These are typical Swedish braces from the 18th and 19th Centuries.
The one on the left is slightly less than a foot tall and the one on the
right is 8 inches tall. The bits are of a spoon type and are
retained on a spring ring.

This brace has a thrust-block head. Keep in mind that the bottom piece
of wood is firmly affixed to the iron and only the top piece rotates.

This is another brace with a thrust-block head.

Another brace with a thrust-block head. The bits on the ring fit this
brace and no other one in this group of braces.

This is yet another brace with a thrust block head.


 
Woodworker's Guide to Wood Collection only $79.99 at Shop Woodworking
1 of 2  
 

Support
wkFineTools.com


Spofford Braces



Breast Drills



   

Copyright © 2005-2018, wkFineTools.com and Wiktor Kuc.  All Rights Reserved.  Designated trademarks and brands are the property of their respective owners.
No part of the content from this website can be reproduced by any means without specific permission of the publisher.
Valid CSS!